Three types are available—load-bearing hinge, hinged lever and rotating hinge. Safety switching point can be set anywhere within 0-180° operating range on some styles. One-piece switch eliminates need for alignment, engagement and risk of breakage of a separate actuator.Datasheet: Công tắc liên động an toàn dạng bản lề - khớp nối.
Giá tham khảo: thấp hơn 5-10% so với giá niêm yết trên trang chủ Banner
|
Limit Switch: Rotary Shaft
Actuator Position: Front back left or right Contact Configuration: 1 N.C. & 1 N.O. Dimensions: 84 x 31 x 31 mm; Plastic Housing |
||||
|
Limit Switch: Rotary Shaft
Actuator Position: Front back left or right Contact Configuration: 2 N.C. Dimensions: 84 x 31 x 31 mm; Plastic Housing |
||||
|
Limit Switch: Vertical Hinged lever +/-90 degrees
Actuator Position: Front back left or right Contact Configuration: 1 N.C. & 1 N.O. Dimensions: 90 x 31 x 31 mm; Plastic Housing |
||||
|
Limit Switch: Right-hand Hinged lever 180 degrees
Actuator Position: Front back left or right Contact Configuration: 1 N.C. & 1 N.O. Dimensions: 90 x 31 x 31 mm; Plastic Housing |
||||
|
Limit Switch: Left-hand Hinged lever 180 degrees
Actuator Position: Front back left or right Contact Configuration: 1 N.C. & 1 N.O. Dimensions: 90 x 31 x 31 mm; Plastic Housing |
||||
|
Limit Switch: Vertical Hinged lever +/-90 degrees
Actuator Position: Front back left or right Contact Configuration: 2 N.C. Dimensions: 90 x 31 x 31 mm; Plastic Housing |
||||
|
Limit Switch: Right-hand Hinged lever 180 degrees
Actuator Position: Front back left or right Contact Configuration: 2 N.C. Dimensions: 90 x 31 x 31 mm; Plastic Housing |
||||
|
Limit Switch: Left-hand Hinged lever 180 degrees
Actuator Position: Front back left or right Contact Configuration: 2 N.C. Dimensions: 90 x 31 x 31 mm; Plastic Housing |
||||
|
|
SI-HG63FQDRR HINGE SWITCH HINGE SAFETY INTERLOCK
|
|||
|
|
||||
|
|
SI-HG63FQDR HINGE SWITCH HINGE SAFETY INTERLOCK
|
|||
|
|
||||
|
|
SI-HG63FQDL HINGE SWITCH HINGE SAFETY INTERLOCK
|
|||